Hi,
This Tutorial is to connect two different PC in Packet tracer, If you are not familiar with OSI model basics, go to our CCNA OSI Model video on youtube ” OSI network kings ” ,
SO for example
Pc1 ———————————connected to —————————-PC2
pc1 – 192.168.1.1
pc2 – 192.168.1.2
Points to Remember,
1. You can only assign Class A, Class B, Class C ?ip address.
2. Range between 1 – 229
3. You cannot assign all host value 0 , and 1 too, It means you cannot assign Network ID and broadcast ip address.
Lets start