OSPF BGP MPLS Course

 5/5

About Course

Are you looking to advance your networking skills and knowledge? Look no Further than OSPF BGP MPLS! Get familiar with these major topics of the CCNP Enterprise course- Open Shortest Path First or OSPF course, Border Gateway Protocol or BGP course, and Multiprotocol Label Switching or MPLS course. Dive deep into the key routing protocols namely, OSPF and BGP. Learn how to use the best combination i.e., the MPLS/OSPF/BGP combination. Learn how OSPF works and how MPLS functions in the OSI layer. By the end of this OSPF, BGP, MPLS course a candidate will be able to cover the major topics for the CCIE Enterprise Infrastructure course exam.  

Degree	Certificate
Duration	Course Duration is 30+ Hours
Qualification	Graduate
Average Salary	Upto INR 20+ LPA
Employment Roles	Network Operations Center Engineer, Network Operations Engineer.

Eligibility

✓ Graduation

✓ Basic understanding of the IT industry

✓ Cisco CCNA Certification (preferred)

✓ 1-2 years of experience in Networking

✓ Attention to detail

✓ Basic communication skills

✓ An analytical mind

✓ A keen observer

Book Free 1 to 1 Guidance Session
with Career Counsellor

Days

Hours

Minutes

Seconds

Have a look at Network Kings Terms and Privacy Policy

We offer world's biggest virtual labs

✓ Experience real world simulations to become job ready.

✓ Get 24×7 access to labs to learn at your convenience.

✓ Access virtually from any part of the world.

✓ Zero downtime.

✓ Industry-oriented training.

OSPF BGP MPLS Syllabus

01
Multiprotocol Label Switching (MPLS) 

MPLS Intro
MPLS Layer 3 VPN
MPLS Layer 3 PE-CE

02
Border Gateway Protocol (BGP)

BGP Intro
BGP Types 
BGP Best Path Selection 
BGP Advance and Troubleshooting

03
Open Shortest Path First (OSPF)

OSPF Intro
OSPF Neighborship 
OSPF Path Selection

We offer world's biggest virtual labs

Experience real-world simulations to become job ready.

Get 24×7 access to labs to learn at your convenience.

Access virtually from any part of the world.

Zero downtime.

Industry-oriented training.

Meet your Mentor

Atul Sharma

Having 12+ years of experience in the IT industry, your favourite mentor, Atul Sharma, is a Network Engineer and the founder of Network Kings who began his IT journey merely through a YouTube channel in 2013 and focussed on his vision to produce Engineers worldwide. He has worked with Aricent, TCS, Apple, and Juniper.

Amit Bhatt

After clearing the top certification exams - RHCE, and RHCSA, Amit Bhatt has become an asset to IT. He has approximately 11 years of industry experience. He has worked with firms like TechStratus Solutions Pvt. Ltd. CDAC, IBM, and Integrated Solutions.

Sukesh

Your mentor, Sukesh, has gained 12 years of industry experience by clearing CCIE Security, NSE1, NSE2, and VCP-DCV certification exams. He has worked with HCL, CompuCom, RSTFORUM, Capita IT Enterprise Services, Sungard Availability Services, and Cyber Software.

Adhirath

One of your favourite mentors, Adirath, has around 4+ years of industry experience. He has worked with Ideogram Technology Solutions Pvt. Ltd. and has acquired CEH, CompTIA PenTest+, VMware, MCSA, CCNA, and CCNP certifications.

Regular LIVE Webinars

Upskill your knowledge with Live Webinars held by Industry Experts catering learners from different domains.

Upcoming Batches

Watch out for our upcoming Live webinars and events

Weekday Batch
5 March, 08:00 PM IST

Weekday Batch
15 March, 08:00 PM IST

Weekday Batch
17 Apr, 08:00 PM IST

Weekday Batch
25 Apr, 08:00 PM IST

Word of Mouth

Knowledge is Power. Know It From Our Alumni!

Everything You Need to Know about OSPF BGP MPLS Course

What is the OSPF, BGP, and MPLS course?

The OSPF, BGP, and MPLS course is one of the best IT courses if you are interested in computer networking. These three networking protocols help routers to communicate with each other and they also help in forwarding data across a network. These three main routing protocols are an important part of the Cisco Certified Network Professional (CCNP) Enterprise certification.

A link-state routing protocol called OSPF (Open Shortest Path First) is used to assist routers in determining the shortest path between two network nodes. It can support networks with thousands of routers because it is highly scalable.

Another significant protocol for exchanging routing data among routers in various autonomous systems is BGP (Border Gateway Protocol). Internet service providers (ISPs) use it to exchange traffic with other networks and link their own networks to others.

The MPLS (Multiprotocol Label Switching) protocol enables routers to forward packets based on labels rather than IP addresses, which enhances the performance of network traffic. This can increase the speed and effectiveness of data transfer and lessen the amount of processing required by routers.

You will learn everything you need to know about these three protocols in the OSPF BGP MPLS training. You'll discover each protocol's background and evolution as well as its operation and application in virtual networks.
This course is an excellent place to start if you're a networking professional trying to broaden your knowledge or a student looking to learn more about computer networking.

Are you Eligible for OSPF BGP MPLS Course?

The OSPF, BGP, and MPLS course has no strict criteria for who can do this course. You can enroll in this course if you have the following:

Working professionals such as Network Engineers, IT Professionals, and System Engineers can take this course to learn more in-depth about network routing and switching.
The recent computer science graduates who want to expand their network infrastructure knowledge.
The candidates who have cleared the Cisco Certified Network Associate (CCNA) exam and want to upskill.

With this special course, you can expand your knowledge in the network enterprise domain and learn all the underlying technologies that make these protocols work. You will also get to experience hands-on applications of these protocols in the real world.

If you are a newbie who is just starting out in computer networking, this OSPF course is also a great way to learn more about the domain. You'll gain a deep understanding of these important protocols and be better equipped to design, implement, and troubleshoot complex network infrastructures.

What are the requirements of the OSPF BGP MPLS course?

It is important that you checkmark most of the following mentioned requirements in order to be fit for the OSPF, BGP and MPLS course provided by Network Kings. These pre-requirements are listed below:

You must have a solid understanding of basic networking concepts. Therefore, we recommend you take the CCNA 200-301 course first.
It is recommended that you have a good knowledge of P addressing, subnetting, routing, and switching.
You should also be familiar with the OSI model and TCP/IP protocol suite.
It is the best case if you have some experience working with network devices such as routers and switches. You must be comfortable configuring these devices using the command-line interface (CLI).
You should also be handy with network troubleshooting techniques.
However, if you do not have industry knowledge, it is completely fine. You should wither have hands-on practice with network simulation software such as Cisco Cisco Packet Tracer or GNS3.

The OSPF BGP MPLS certification is designed for IT professionals who have intermediate-level networking knowledge. It is apt for candidates who want to expand their knowledge on advanced routing and switching technologies.

If you have any of the requirements mentioned above, you can enroll in our OSPF, BGP and MPLS course.

What will you learn in the OSPF BGP MPLS Training?

A wide variety of topics and concepts are covered in the OSPF, BGP and MPLS course that takes you on an in-depth learning journey about these networking protocols. You will learn the following skills/concepts, specifically:

The fundamentals of OSPF, including its operation, configuration, and application in finding the shortest path between two network nodes.
The principles of BGP, including how it connects networks by being used by Internet service providers (ISPs) to send routing data between routers in various autonomous systems (AS).
The fundamentals behind MPLS, including how it works in virtual private networks (VPNs) and other applications to improve network traffic performance by forwarding packets based on labels rather than IP addresses.
You will also learn how to set up and fix OSPF, BGP, and MPLS in practical network settings.
Learn the practices for designing and implementing network infrastructures that use OSPF, BGP, and MPLS.

By the end of this course, you will have a deep understanding of how OSPF, BGP, and MPLS work, and how they are used in real-world networks.

What are the Job Opportunities After OSPF, BGP and MPLS Course?

You can land the following job positions after the OSP, BGP and MPLS course:

L2 Network Engineer
Software Developer - L2/L3 routing protocols
IP Engineer
Routing and Switching Developer
Network Analyst
Network and Switching Subsystem (NSS) Engineer
L1 Network Engineer

What is the Expected Salary after the OSPF, BGP and MPLS Course?

After the OSPF, BGP and MPLS course, you can expect a median salary of Rs. 8 lakhs. The salary could even go higher upto Rs. 18 lakhs if you have over 3 years of experience in the industry.

Why choose Network Kings for Learning OSPF BGP MPLS?

Whether you're a networking professional looking to deepen your understanding of these protocols, or a student looking to learn more about computer networking, the OSPF, BGP, and MPLS course provided by Network Kings give you a detailed introduction to these important technologies.

We can list plenty of reasons why you should choose Network Kings. Some of them are:

You get the best online training directly from Network Engineers with over 12 years of experience in the industry.
You get 24/7 access to the world’s biggest Cisco labs to practice all the concepts hands-on.
A specially dedicated career counselor team to help you choose the best course path.
You get access to the latest learning content that is relevant to the industry.
Know the secrets and tricks of how to apply in the top IT companies.

At Network Kings, you get all of these facilities.

Is OSPF, BGP and MPLS course worth it?

Yes, learning OSPF, BGP, and MPLS can be very valuable in the networking industry. These protocols are widely used in large-scale networks for routing, traffic engineering, and optimization. Understanding how to configure, troubleshoot, and optimize these protocols can make you a valuable asset in the networking industry.

Conclusion

To conclude, the OSPF, BGP, and MPLS course provided by Network Kings is the best course for candidates who are looking to expand their career horizons in the networking industry. You can earn a better salary by learning these most in-demand networking protocols.

Enroll in the latest batch to start your learning journey with us!

Frequently Asked Questions

01
Why is OSPF used in MPLS?

OSPF is a link-state routing protocol widely used in MPLS networks. It was developed by the Internet Engineering Task Force (IETF) in the early 1990s. OSPF is an Interior Gateway Protocol designed to provide scalability and reliability within an autonomous system by dividing it into different areas.

02
What are MPLS and BGP?

MPLS is a protocol used to create a private network across the Internet. It stands for Multi-Protocol Label Switching. While BGP, on the other hand, stands for Border Gateway Protocol. It is an Internet Protocol that provides routing information among autonomous systems on the Internet.

03
Does MPLS use BGP?

MPLS is a network protocol designed to provide fast and reliable transport of packets. It does not use BGP.

04
Does MPLS require OSPF?

MPLS is a layer 3 protocol that provides the ability to create virtual circuits. This means that it does not require OSPF, which is a layer 2 protocol. MPLS is not dependent on any other protocols to provide its functionality. It can be used independently, without any other protocols like OSPF or ISIS.

05
What is the OSPF super backbone area?

The OSPF super backbone area is the backbone area of an autonomous system. It is a contiguous group of OSPF sharing a common boundary with one another.

06
Why Do We Use MP-BGP in MPLS?

BGP is a protocol used to enable the exchange of routing information between routers in a network. MP-BGP is a protocol used to exchange routing information between routers in an MPLS network. It uses the BGP protocol for exchanging routing information, but it also has some extensions that allow it to support MPLS labels and other features specific to MPLS networks. The extension of MP-BGP was developed by Cisco Systems and was first published in 1998.

07
What is OSPF in networking?

OSPF is a routing protocol which stands for Open Shortest Path First. It is used to calculate the best path to a destination and share that information with other routers in the network.

08
Why do we use IGP in MPLS?

IGP is an acronym for Interior Gateway Protocol used by Network Engineers to control the flow of data in a network. IGP is used in MPLS as it is an open protocol that allows the exchange of routing information between different networks.