Network Kings

LIMITED TIME OFFER

$999 $499 only For All Access Pass Today! USE PROMO CODE : LIMITED

d :
h :
m

CCNA Online Trainer

CCNA Online Trainer

For those who want to make a career in Networking, I train personally online for career guidance, we can also make your resume to boost up your career, There are plenty of things you can do in Networking to choose the correct path all it matters,

You have a question in mind why do I spend in Online training Fee is too much for, But do you think 1 on 1 training would be cheaper if you getting a quality training which is equivalent that you have attended 3 times CCNA class training, Exam preparation No cramming of dumps, Actual Understanding of Each question.

Why choose personal Online Training?

This mode of Personal Online training delivery has several advantages over conventional learning models:

Quicker Learning

  1. Better Quality in terms of audio-video quality and deep understanding of concepts training
  2. Trainer’s Full Attention with 1 on 1 training, me and you are talking and talking
  3. Need-based course customization, if you want to add more things we can work on it.
  4. High level of interaction apart from training itself, What about career interactions?
  5. Easier adaptability coz if you don’t get it we repeat and repeat until you grab it.

Visit nwkings.com for Fee structure and book your seats and make a career in Networking.

Regards

Atul Sharma

Your Cisco Trainer

Worlds first and only 8x CCIE

Just read on INE BLOG that Neil Moore Completed his 8th CCIE Track which was in Collaboration, I think this the what we call hard work with dedication.

I think we should know what he did during his CCIE Exams. I also read that he is not Working in cisco, checked his LinkedIn profile he is working with HP.

Here is the Track list with Year completion.

This time becoming the worlds first and only 8x CCIE.

What Is MPLS and Why do we need it?

What Is MPLS and Why do we need it?

Multi-Protocol Label Switching (MPLS) in simple terms, which enables a Service Provider (SP) to offer scalable and internetworking solutions for its clients. In addition to scalability, MPLS offers Traffic Engineering (TE) and Quality of Service (QoS). While TE is more oriented towards SP, scalability and QoS features will benefit both SP and its customers. What MPLS does is an addition of one or more labels which is inserted between Layer 2 header and Layer 3 header in a datagram. An additional label offers one more way of packet forwarding in addition to the traditional IP lookup. Since the MPLS label is placed just before Layer 3 header and after Layer 2 header, an SP router uses MPLS label in its core to make forwarding decisions, instead of Layer 3 information. Now, let me try to answer the question : ?Why do we need MPLS??.

Scalability: In this age of globalisation, business is expanding like never before. As businesses reach more destinations, their need of being connected with other locations increases. Expansion can introduce difficulties for organizations as well as Service Providers. When the number of locations getting connected to each other increases, it becomes very difficult to manage. Service Providers face more problems because they have to serve multiple customers and everyone is reaching out for more and more locations. To add to this problems, the competition in the market has also grown up significantly, which forces Service Providers to offer cost effective and easy to manage solutions to their customers. MPLS is an answer to all such issues. MPLS gives service providers ability to scale up very easily and without difficulty. In the early days of Internetworking, a service provider had to manage many virtual circuits, deal with different technologies and all. But with MPLS enabled cores, it has become very easy for them to manage such situations. Further, they can reach out to other expanding markets ? even those markets where they have no physical presence, also without much complications through Network-to-Network Interface (NNI). NNI is a kind of partnership with another service provider who can deliver connectivity links in the target market.

For customers, they can expand their core business without having to worry about the connectivity issues. Since SP can also participate in the connectivity for them, they do not have to deal with many issues like managing their own routing ? which many organizations used to do earlier. With the emergence of Managed Solutions, customers can free themselves of managing the network connectivity. The SP will take care of all their connectivity needs.

Quality of Service: With multimedia applications gaining popularity and migration towards IP based PABX systems, it is essential to have QoS in place. IP based voice service needs to have more priority as it is very sensitive to delay, jitter etc. Also, more and more video applications are finding its place in enterprise networks as Video Conferencing and Telepresence solutions can bring down the cost of travel and save time. Such applications also need to be given priority in addition to the business critical applications. Earlier, ATM was the answer for many people to have QoS. But the things have changed as usage of ATM itself needs migration to another technology and it requires capital expenditure also. MPLS can provide ATM like QoS features. MPLS label has a 3 bit field called Traffic Class (TC) which was formerly known as EXP (Experimental) field. Core routers can provide different set of treatment for each MPLS frame based on the value of TC.

Flexibility: As a technology, MPLS imposes few restrictions on interoperability with other technologies. Suppose, for a customer who has got global presence needs to connect his various offices across the globe. Most of the Service Providers in North America would be offering SONET/ATM based connectivity, while their European counterparts may be using SDH. Many countries in Asia are using Ethernet as a preferred technology for WAN connectivity. In such cases, it becomes a pain to make all these technologies to work together using plain IP VPN. Different technologies may need more technological as well as capital expenditure. But MPLS makes this easy. MPLS can interoperate with various technologies. With Any Traffic over MPLS (AToM) a Service Provider can transport Layer 2 frames over MPLS backbone. This makes life easier for both customers and providers. Also, with Interworking IP, one can have a Layer 2 VPN with Serial link on one side and Ethernet on the other side.

Besides the flexibility with technology itself, the Service Provider can offer both Layer 2 and Layer 3 VPNs on the same platform. Customers who want to manage their routing can do it themselves with Layer 2 VPN and others can use Layer 3 VPN. Such a common platform can would make the life easy for a sales guy who can very well address the customer requirements and offer exciting solutions.

Traffic Engineering: This is a feature that every Service Provider would love to use. Mostly, SPs would be having more than one link between different routers, both for redundancy and for meeting customer requirements. The problem arises, when the bandwidth of these links are different. SP can configure the load sharing between these links using various IGP features, but that may prove to be very difficult and the model itself is not scalable. If the configurations are not properly documented, troubleshooting can be a pain. MPLS traffic Engineering can address such scenarios. The use of TE along with IGP can provide better solution.

MPLS is more oriented towards Service Providers. A customer network need not be aware of MPLS and for most of the links a default route from Customer router to Provider router is enough. While a provider can address the network scalability and redundancy issues, customer can concentrate on his core business without having too much bothered about network connectivity.

connecting two lans in different locations

Hi welcome to network kings, this tutorial is to connecting two lans in different locations, so suppose you have two locations or you can say two switches and connected to one ISP ( CISCO router )

First Connect both the switches with Cisco Router.

1. Chandigarh Branch ?Gateway ip address 192.168.1.100

2. Gurgaon Branch Gateway ip address 192.168.5.100

3. Chandigarh Lan Subnet 192.168.1.0/24

4. Gurgaon Lan Subnet 192.168.20/24

Now in 1st image i am configuring ip address to PC’s

In 2nd image the most important one is to configure router interafaces
int fa1/0 i am giving 192.168.1.100 chandigarh gateway
on fa0/0 i am giving 192.168.5.100 gurgaon gateway

in 3rd image you can see we can able to ping from chandigarh pc to Gurgaon PC.

Thanks & Share .

cisco command line basics

Hi, Today lets check, The cisco command line basics

1.The “?”

You can use the command in many ways. First, use it when you don’t know what command to type. For example, type at the command line for a list of all possible commands. You can also use it when you don’t know what a command’s next parameter should be.

2. show running-configuration

The show running-config command shows the router, switch, or firewall’s current configuration. The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router. Keep in mind that config is not saved until you do a copy running-configuration startup-configuration. This command can be abbreviated?sh?run.

3.?show interface

The?show interface?command displays the status of the router’s interfaces. Among other things, this output provides the following:

  • Interface status (up/down)
  • Protocol status on the interface
  • Utilization
  • Errors
  • MTU

4.?no shutdown

The?no shutdown? command enables an interface (brings it up). This command must be used in interface configuration mode. It is useful for new interfaces and for troubleshooting. When you’re having trouble with an interface, you may want to try a?shut?and?no shut.

5. show ip route

The?show ip route?command is used to show the router’s routing table. This is the list of all networks that the router can reach, their metric (the router’s preference for them), and how to get there.

6. show version

The?show version?command gives you the router’s configuration register (essentially, the router’s firmware settings for booting up), the last time the router was booted, the version of the IOS, the name of the IOS file, the model of the router, and the router’s amount of RAM and Flash. This command can be abbreviated?sh?ver.

7. debug

The?debug?command has many options and does not work by itself. It provides detailed debugging output on a certain application, protocol, or service. For example,?debug ip route?will tell you every time a router is added to or removed from the router.

Connecting PC’s in packet Tracer

Hi,
This Tutorial is to connect two different PC in Packet tracer, If you are not familiar with OSI model basics, go to our CCNA OSI Model video on youtube ” OSI network kings ” ,

SO for example

Pc1 ———————————connected to —————————-PC2

pc1 – 192.168.1.1

pc2 – 192.168.1.2

Points to Remember,

1. You can only assign Class A, Class B, Class C ?ip address.

2. Range between 1 – 229

3. You cannot assign all host value 0 , and 1 too, It means you cannot assign Network ID and broadcast ip address.

Lets start

ccie training in india

ccie training in india

CCIE Certification Examination is acknowledged as the most confounded and most-looked for confirmation that diversions numerous individuals. They know beyond all doubt that this accreditation might carry great cash to their business as well as present to them the to victory.? Once you get the CCIE Training and passed, then you are now acknowledged as a master. It is quite known worldwide and when you get this sort of confirmation, you get incredible notoriety in any field of Information Technology.

This confirmation does not oblige anybody to have a formal preparing from any Cisco-identified organization. For the individuals who are intrigued, they should just have high comprehension level regarding the matter of closure to-end systems administration, and the various intricacies that are identified with it. Active preparing might be truly accommodating for the individuals who are intrigued to claim this sort of accreditation.

Reach of Salaries

Read more

Top 10 IT certifications of 2014

Top 10 it certifications of 2014

1. PMI Project Management Professional (PMP)

With a normal twelve-month compensation of $101,695, the PMP confirmation from the Project Management Institute (PMI) association beat the agenda of most noteworthy paying certificates for the present year.

Read more

Basics of networking

SOME BASIC THINGS BEFORE STARTING CCNA !

Lets Exercise

ping :– packet internet gopher it uses icmp ( internet control message protocol)? protocol For verification the other device is reachable to me or not?? ipconfig :– to check the ip address of a computer ipconfig /all :– to check the ip address + mac address getmac :-? to check the mac address of a computer ?netstat :– to check the session’s nslookup :– to check the all servers of a website arp -a? :– to check arp table arp ?d :– to delete arp table ( run as administrator) ? TO check public ip ? Visit :www.whatismyipaddress.com? to check your public ip ??????????? ? To assign address to your PC ? 1.windows button +? R??? 2. type? ?ncpa.cpl? to go to your network connections 3 choose your lan adapter and go to properties and click on IPV4 HUB

  • ALWAYS do Broadcast
  • Layer 1 device
  • Shared bandwidth
  • Less no of ports
  • Doesn?t learn mac address?

SWITCH

  • which connects two or more computers together
  • Many no of ports
  • Learn mac address
  • Two types of switch :-
  • Manageble switch and unmanageable switch
  • Layer 2 devices, datalink layer ( mac address )

ROUTER:

  • It is an internetworking device used to connect two or more different networks
  • It works on layer 3 i.e. network layer
  • It Performs Routing

?

  • Network Basics: The Definition of a Static IP Address
  • Why are ARP queries sent in a broadcast frame? Why is the response sent with a specific destination MAC address?
  • Understanding Public IP Addresses
  • Layer 2 ARP spoofing attack
  • Troubleshooting

What is networking?

What is Networking?

What is a network anyway?

A network is just a collection of devices and end systems connected to each other and able to communicate with each other. These could be computers, servers, smartphones, routers, etc. A network could be as large as the internet or as small as your two computers at home

Sharing files and a printer.

Some of the components that make up a network:

Personal Computers (PC): These are the endpoint of your network, sending and receiving data.

Interconnections: These are components that make sure data can travel from one device to another, you need to think about:

Network Cards: they translate data from your computer in a readable format for the network.

Media: network cables, perhaps wireless.

Connectors: the plug you plug in your network card.

Switches: These boxes are network devices that provide a network connection for your end devices like PCs.

Routers: Routers interconnect networks and choose the best path to each network Destination.

TYPES of APPLICATIONS

Batch applications

File transfers like FTP, TFTP, perhaps an HTTP download. Could be a backup at night.

No direct human interaction.

High bandwidth is important but not critical.

Interactive applications

Human-to-Human interaction

Someone is waiting for a response, so response time (delay) is important

Real-time applications

Also Human-to-Human interaction

VoIP (Voice over IP) or live video conferencing.

End-to-end delay is critical